Showing posts with label amplifer. Show all posts
Showing posts with label amplifer. Show all posts

Tuesday, December 24, 2013

Audio Amplifer Circuit 230W With MOSFET IRFP240 9240

Audio Amplifer Circuit 230W  With MOSFET IRFP240,9240Audio Amplifer Circuit 230W With MOSFET IRFP240,9240

Here is simple LED-power audio amplifier ambit with MOSFET amplifier TL071C and 2 may be up to 45 W into 8 ohms. For MOSFET IRFP240 and IRFP9240 are acclimated assurance with accessory can now be these modification.

The arrangement is at the appeal SILICONIX and the voltage change of 2 consecutive resistances from suppliers operating voltage amplifier disciplinarian was inserted. MOSFET charge be army on at atomic one condenser 1K / W.

Amplifier ability is 70%, the abridgement in the abundance baloney in added than 0.2% at 20 Hz at 8 ohms and 10W. With a accumulation voltage in the ambit of + – 30V, can accumulation audio amplifier MOSFET 45W into 8 ohms and 70W into 4 ohms. Remember that the complete amplifier is short, so all you can analysis the radio button is protected, whether the apostle is connected.

Next full text...

Monday, November 4, 2013

Schematic Audio Amplifer with IC AN315

This Schematic Require voltage 9 - 18 Volt. Good voltage for this schematic is 12 V. This is Mono amplifier with output 5,5 Watt and impedance 8 Ohm. You can make this Circuit easily because i give simple and clear scheme.
See this Schematic and Datsheet IC AN315 :


Click to Enlarge



Datasheet IC AN315
Vcc                = 9-18 V
Pout               = 5,5 W
RL                  = 8 Ohm
Ft                   = 30hz - 18Khz
Icco                = 28 mA
Package         = SIP2-11
Manufactered = MATSUSHITA
Next full text...

Wednesday, October 30, 2013

Circuit Audio Amplifer with IC 5G37

 Himm.,.,. I just  get this schematic on my mind . This Circuit require voltage supply minimum voltage is 6 Volt and maximum voltage is 12 V . You can  use voltage betwen 6 - 12 volt. Output speaker is mono with power 0,7 watt and impedance 8 Ohm.
See below this Circuit and datasheet IC 5G37 :




Datasheet IC 5G37
Vcc                = 6-12 V
Pout               = 0,7 W
RL                 = 8 Ohm
Ft                   = 40-17 Khz
Icco               = 20 mA
Package         = TABS1-14
Manufactered = China
Next full text...

Wednesday, October 23, 2013

60 Watt Subwoofer Amplifer Circuit

THis is very nice amplifier circuit , because High output , and voltage required is also not too large, and suitable for th subwoofer speaker.This circuit use IC TDA1102 ,  Minimum require voltage 6 volt and maximum voltage 16 volt with impedance 4 ohm . This circuit perfect those of you wear the speakers subwoofer especially in the small room , like in the car. See circuit subwoofer below :


Next full text...

Thursday, September 26, 2013

Circuit Audio Amplifer with IC TBA 611

 This Circuit require voltage  4,5 to 15 Volt. I recomended to this circuit supply with 12 volt . Output audio is mono with power 1 Watt.
See this circuit and datasheet IC TBA611 below:



Datasheet IC TBA 611
Vcc                = 4,5-15 V
Pout               = 1 W
RL                 = 8 Ohm
Ft                   = 50-15 Khz
Icco               = 10 mA
Package         = TABS4-14
Manufactered = RFT

Next full text...