Tuesday, October 22, 2013

Car Stereo Audio Amplifier with TDA1553CQ Circuit Diagram

Car Stereo Audio Amplifier with TDA1553CQ Circuit DiagramCar Stereo Audio Amplifier with TDA1553CQ Circuit Diagram

This is a stereo audio amplifier for your car. The ambit is powered by a distinct IC TDA1553 with some alien components, this IC will handle your stereo car audio system.

The TDA1553CQ is a caked chip class-B achievement amplifier in a 13-lead artificial DIL-bent-SIL ability package. It contains 2×22 W amplifiers in BTL configuration. The accessory is primarily developed for car radio applications.

Special features of the device are:

3-state mode switch

· standby: low supply current (<100>

Loudspeaker protection

When a short-circuit to ground occurs, which forces a DC voltage across the loudspeaker of >= V, a built-in protection circuit becomes active and limits the DC voltage across the loudspeaker to <= V. Pin 12 detects the status of the protection circuit (e.g. for diagnostic purposes).

Short-circuit protection

If any output is short-circuited to ground during the standby mode, it becomes impossible to switch the circuit to the mute or operating condition. In this event the supply current will be limited to a few milliamps.


No comments:

Post a Comment