Showing posts with label 20. Show all posts
Showing posts with label 20. Show all posts

Tuesday, November 19, 2013

Power Amplifier Circuit 2 x 20 W stereo with IC AN7156N

This circuit operate with IC AN7156N . You just can use this IC , because havnt similarity it. In this Circuit have 2 input IN R and IN L and have Output R and L . Voltage supply require 15 V , minimum voltage 9 V and maximum voltage 24V . And the voltage must DC voltage , and better the DC voltage filtering .
Maximum Output for 1 speaker 25 W , so this circuit have maximum output 2 X 25 W with minimum impedance 4 ohm. See this circuit schematic below :

Click image to view enlarge

Next full text...

Sunday, November 17, 2013

4 20 Volts Amplifier Circuit

This is an audio amplifier circuit based on IC, and IC were used that MPC563 with minimal output 6W, with impedance of 4 Ohm. Supply Voltage Minimum 4 Volt DC and a maximum voltage to 20 Volts DC. See him under this Scheme.
4 - 20 Volts Amplifier Circuit
4 - 20 Volts Amplifier Circuit
Next full text...

Thursday, October 24, 2013

600W subwoofer audio amplifier with 20 channel mixer and parametric

This picture below is about my setup subwoofer amplifier with 20 CH mixer and parametric. This amplifier use transformer 10 ampere to supply the power and 3 ampere transformer use to supply mixer and parametric.Elco capacitor that i use for the transformer 10 A, only 10000uF numbered 2. The circuit of amplifiers that i use which is 600 watt mono subwoofer amplifier . And booster amplifier only use 2 Sanken transistors. See picture subwoofer amplifier assemblies below :
Looked over the side
Front view

Back top




Next full text...

Thursday, October 17, 2013

9 20 Volt amplifier circuit

KA2203 , SN16975, TBA820, UL1482P schematicsFor this time I will post the scheme following an amplifier of the IC KA2203, SN16975, TBA820, UL1482P. Which has 4 Watt power output with 4 Ohm impedance. At least 8 Volt supply voltage and a maximum of 20 volts.



Part List
R1 = 100K
R2 = 56R 
R3 = 56R
Use 1/2 W resistor

Rangkaian amplifier KA2203 , SN16975, TBA820, UL1482P
C1 = 47uF
C2 = 100uF
C3 = 100uF
C4 = 470uF
C5 = 470pF
C6 = 0.22uF
C7 = 100uF
U1 = KA2203 , SN16975, TBA820, UL1482P
Next full text...